590 Flush Grid

Belts wider than standard are available with 3 inch increments. The nominal tensile strength and the nominal width tolerance are valid for a temperature of 23°C (73 °F). The actual belt width may differ from the nominal value depending on the material used, with the following percentage tolerances: For POM belts, the variation ranges from 0% to -0.5%. For PBT belts, the variation ranges from 0% to -0.5%. For PP belts, the variation ranges from -0.5% to +0.5%. Non-Standard belt widths are incremented by 12.7 mm (0.5”). The minimum width is 76.2 (3.0”).