590 Flush Grid

*Belts wider than standard are available with 3 inch increments. The nominal tensile strength and the nominal width tolerance are valid for a temperature of 23°C (73 °F). The actual width of the belt typically falls below the nominal value by 0.1% to 0.3%. For POM belts up to 750 mm (30”) in width, the shrinkage ranges from -4 mm to 0 mm, and for those wider, from -0.5% to 0%. For PP belts up to 750 mm (30”) in width, the decrease is between -3 mm and 0 mm, with the reduction for wider belts ranging from -0.25% to 0.25%. Non-Standard belt widths are incremented by 12.7 mm (0.5”). The minimum width is 76.2 (3.0”).