7010 Cone Top

Belts wider than standard are available with 75 mm increments. Non-standard widths are available with 18.75 mm increments. The nominal tensile strength and the nominal width tolerance are valid for a temperature of 23°C (73 °F). The actual belt width may differ from the nominal value depending on the material used, with the following percentage tolerances: For PE belts, the variation ranges from -0.5% to +1%. For POM belts, the variation ranges from 0% to -0.5%. For PP belts, the variation ranges from -0.5% to +0.5%. Non-Standard belt widths are incremented by 18.75 mm (0.74”). The minimum width is 37.5 mm (1.5”). Non-bricklayed belts are available in widths of 75 mm (3”), 150 mm (6”), 300 (12”) and 600 mm (24”).