7585 Flush Grid

*Belts wider than standard are available with 4 inch increments. The nominal tensile strength and the nominal width tolerance are valid for a temperature of 23°C (73 °F). The actual width of the belt typically falls below the nominal value by 0.1% to 0.3%. For POM belts up to 750 mm (30”) in width, the reduction ranges from -3 mm to 0 mm, and for widths beyond that, from -0.4% to 0%. For PP belts up to 750 mm (30”) in width, the reduction ranges from -3 mm to 0 mm, and for widths beyond that, from -0.4% to 0%.